Profile Clip MPK 46 HCP
Group: B113
Profile Clip MPK 46 enables lateral, infinitely variable connection of threaded rods to the Profile PRO 46
Height adjustment of the pipe clamp remains unlimited
Overview of Types
General Information
With the Profile Clip MPK 46, threaded rods can be connected to the side of the Profile PRO 46 in a stepless manner. The height adjustment of the pipe clamp is also not limited. Due to the small installation footprint and offset lateral profile mounting, the clamp ears can be positioned to overlap one another.
Certification
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Load range
Type | -VX,perm. | VX,perm. | -VY,perm. | VY,perm. | -VZ,perm. | VZ,perm. |
MPK 46 M 8 HCP | 0,84 kN | 0,84 kN | 0,52 kN | 0,52 kN | 2,92 kN | 2,92 kN |
MPK 46 M10 HCP | 0,84 kN | 0,84 kN | 0,52 kN | 0,52 kN | 2,92 kN | 2,92 kN |
MPK 46 M12 HCP | 0,84 kN | 0,84 kN | 0,52 kN | 0,52 kN | 2,92 kN | 2,92 kN |
MPK 46 M16 HCP | 0,84 kN | 0,84 kN | 0,52 kN | 0,52 kN | 2,92 kN | 2,92 kN |
Type | -MX,perm. | MX,perm. | -MY,perm. | MY,perm. |
MPK 46 M 8 HCP | 0,05 kNm | 0,05 kNm | 0,04 kNm | 0,04 kNm |
MPK 46 M10 HCP | 0,05 kNm | 0,05 kNm | 0,04 kNm | 0,04 kNm |
MPK 46 M12 HCP | 0,05 kNm | 0,05 kNm | 0,04 kNm | 0,04 kNm |
MPK 46 M16 HCP | 0,05 kNm | 0,05 kNm | 0,04 kNm | 0,04 kNm |
Also available as pre-assembled module BG-MPK 46.
Software
This product is available in the following software.
Installation
Hook the Profile Clip MPK 46 into place on one side and snap it on by pressing in the middle. Then push the threaded rod through, set the required height and lock it with a nut at the top and bottom.
Tightening torque: 15 Nm