Profile Adapter MPA F
Group: B104
For integrating lighter constructions within the siFramo modular secondary steel system
Enables profile transition from siFramo Beam Section TP F 80 or 100 to siMetrix Profile PRO 46
Overview of Types
General Information
For integrating lighter constructions within the siFramo modular secondary steel system. Enables the profile transition from the siFramo Beam Section TP F 80 or 100 to the siMetrix Profile PRO 46.
Certification
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Load range
Type | -VX,perm. | VX,perm. | -VY,perm. | VY,perm. | -VZ,perm. | VZ,perm. |
MPA F 80-46 HCP | 1,61 kN | 1,61 kN | 2,43 kN | 2,43 kN | 3,54 kN | 2,64 kN |
MPA F100-46 HCP | 1,61 kN | 1,61 kN | 2,43 kN | 2,43 kN | 3,54 kN | 2,64 kN |
Type | -MY,perm. | MY,perm. | -MZ,perm. | MZ,perm. |
MPA F 80-46 HCP | 0,35 kNm | 0,40 kNm | 0,39 kNm | 0,39 kNm |
MPA F100-46 HCP | 0,35 kNm | 0,40 kNm | 0,39 kNm | 0,39 kNm |
Software
This product is available in the following software.
Installation
To connect the profile, depress both locking sides of the profile intake, insert the profile and close it. The locking mechanism must engage in the profile grooves. The screws are then tightened.
Adapter back plate is secured o the carrier profile TP F with 4 Self Forming Screws FLS F.
No. of Blocks with screws laterally: 4 x M10
Configuration: Base plate welded to profile intake
Required tool: T50 Bit or 17 mm (AF) Socket Bit
Tightening torque: 20 Nm