GE F 100 - 80
Pivot Joint GE F100-F 80 HCP
Group: A437
Part number 113838
Bracing element for single-arm cantilevers with System siFramo 100 and for reinforcement of frame constructions
For type F100–F80, TP F80 beam section is used; for type F100–F100, TP F100 beam section is used
Angle continuously adjustable between 25° and 155°
Technical Data
BP | 100 mm |
HP | 100 mm |
L | 140 mm |
tP | 8 mm |
Wmin | 25° |
Wmax | 155° |
Load range
-VX,perm. | 16,50 kN |
VX,perm. | 16,50 kN |
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Also available with DUALSHIELD for high corrosion protection within C5H environments.
Certification
Installation
Attachment of the Joints to Beam Section TP F 100 by means of 4 Self Forming Screws FLS F at the base plate. The support profile TP F 80 or TP F 100 (depending on joint type) plugged onto the octagon is also attached by means of 4 Self Forming Screws, so 8 Self Forming Screws are necessary in total.
After installation at the desired angle the screws have to be tightened with 40 Nm.
Angle: 25° - 155°