24 - 115 mm
Pipe Clamp STABIL D-3G ME 19- 23 HCP
Group: 1843
Part number 112250
Installation of pipes required for all M&E services - robust and reliable
With sound insulation insert for sound-decoupled pipe mounting – ideal for increased sound insulation requirements.
Technical Data
B1 | 69 mm |
b2 | 31 mm |
D | 23 mm |
D2 | 23 mm |
e | 48 mm |
H | 55.1 mm |
Ma | M16 |
Mi1 | M8 |
Mi2 | M10 |
t | 2 mm |
Sizes 14 to 115 mm are equipped with articulation and welded-on nuts for the clamping bolts. On the joint side, the clamping bolt is pre-assembled; the clamping bolt on the opposite side is mounted into the bore hole and retained by a plastic washer, thus preventing any accidental unscrewing.
Load range
-VZ,perm. | 1,80 kN |
FRP 30 | 0,38 kN |
FRP 60 | 0,2 kN |
FRP 90 | 0,14 kN |
The recommended load is calculated using specific statistical methods relating to break load and is designed to restrict deflection to 1.5 mm or 2 % of the maximum applicable clamping diameter.
Technical specifications
Material base body | steel |
Material insulation body | SBR/EPDM |
Material connecting element | steel |
Surface | HCP |
Corossion class | C4 |
Certification
This product has been awared the RAL quality mark "pipe supports" and "fire-tested pipe supports" and is subject to continuous external monitoring according to RAL GZ-655.
FM-Approval for sizes 29 - 162
No quality mark for sizes 307 - 318
Installation
FM size range 1' to 4' is approved with >= M10 only.
For FM applications use M10 only.
Tightening torques:
| Size range [mm] | Tightening torque [Nm] |
|---|---|
| 14 - 23 | 2 |
| 24 - 115 | 3 |
| 124 - 162 | 5 |
| 165 - 318 | 10 |
Documents
- Pipe Clamp Stabil D3G with Lining – RAL-GZ 655
PDF (0.20MB)