Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
24 - 115 mm
Group: 1883
Part number 808283
Installation of pipes required for all M&E services - robust and reliable
With sound insulation insert for sound-decoupled pipe mounting – ideal for increased sound insulation requirements.
FM Approval Statement – Stabil D-2G Pipe Clamp
PDF (16.5 KB)
B1 | 85 mm |
b2 | 38 mm |
D | 37 mm |
D2 | 37 mm |
e | 64 mm |
H | 72 mm |
Ma | M16 |
Mi2 | M10 |
t | 2.5 mm |
KI2 | 15.07 mm |
KA | 26.08 mm |
Sizes 14 to 115 mm are equipped with articulation and welded-on nuts for the clamping bolts. On the joint side, the clamping bolt is pre-assembled; the clamping bolt on the opposite side is mounted into the bore hole and retained by a plastic washer, thus preventing any accidental unscrewing.
-VZ,perm. | 2,00 kN |
The recommended load is calculated using specific statistical methods relating to break load and is designed to restrict deflection to 1.5 mm or 2 % of the maximum applicable clamping diameter.
Primary element material | steel |
Isolating element material | SBR/EPDM |
Connecting element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
FM size range 1' to 4' is approved with >= M10 only.
For FM applications, at least M10 must be used.
Tightening torques:
| Size range [mm] | Tightening torque [Nm] |
|---|---|
| 14 - 23 | 2 |
| 24 - 115 | 3 |
| 124 - 162 | 5 |
| 165 - 318 | 10 |
Certification
This product has been awared the RAL quality mark "pipe supports" and "fire-tested pipe supports" and is subject to continuous external monitoring according to RAL GZ-655.
FM Approval applies only to the following variants:
- STABIL D-3G in sizes from 29 to 115 mm with a production date up to 04/2026
- STABIL D-3G in sizes from 124 to 162 mm
- STABIL D-2G in all sizes
No quality mark for sizes 307 - 318