Type A
Type B
Eye-Plate HP F100 HCP
Group: A299
Connecting component for direct attachment of rod hanger assemblies to the siFramo 100 system
Pre-welded Eye-Plate serves as a base for connecting Rod Hanger Load Chain Assembly LKV (sizes M10 to M16) and Pipe Clamps type Stabil Form C LK
Overview of Types
General Information
Connecting component for the direct attachment of rod hanger assemblies to the siFramo 100 system. The pre-welded Eye-Plate serves as a basic element for the connection of the Rod Hanger Load Chain Assembly LKV in sizes M10 up to M16 rod and Pipe Clamps type Stabil Form C LK.
Certification
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Load range
Type | -VZ,perm. |
HP F100 - A M10 HCP | 11,20 kN |
HP F100 - A M12 HCP | 12,10 kN |
HP F100 - A M16 HCP | 12,50 kN |
HP F100 - B M10 HCP | 11,20 kN |
HP F100 - B M12 HCP | 12,10 kN |
HP F100 - B M16 HCP | 12,50 kN |
The implementation and construction requirements of the components, their design as well as their verifications and load tests were carried out following the standards VGB R 510 L part I, KTA 3205.3 and DIN EN 13480-3.
Software
This product is available in the following software.
Installation
The siFramo Eye-Plate HP F 100 is fastened to the supporting siFramo 100 section by means of 4no. FLS F screws. The siFramo Eye-Plate can also be fastened directly to concrete by means of 2no. M10 anchors.
Type A: Load Chain runs crosswise to the beam
Type B: Load Chain runs longitudinally to the beam