41/41-45 D
End Support WBD 41/21 D
Group: 1356
Part number 146469
End Support WBD combined with Sikla Channel MS 41 is ideal for setting up support structures on walls, floors and ceilings as a base for frame structures
Generous dimensions and diamond-shaped mounting plate provide high bending moment and stabilize lateral loads
Technical Data
BP | 135 mm |
BP1 | 100 mm |
bP | 11 mm |
H | 31 mm |
HP | 135 mm |
HP1 | 100 mm |
IZP | 14 mm |
lz | 14 mm |
tP | 6 mm |
See assembly instructions
Load range
VX,perm. | 4,00 kN |
Technical specifications
Material base body | steel |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Certification
Installation
Normally, two bolts grouped opposite to each other and along the load axis are sufficient. Only in exceptional cases (e.g. tall uprights in frameworks) four bolts are required.
Minimum torque values for the hexagon bolts of the 41 Holding Brackets are:
| Types | Holding Brackets [pcs] | Bolt for Holding Bracket | Accessories | Torque [Nm] |
|---|---|---|---|---|
| 41/21-31 bis 41/41-45 | 1 | M10 | pre-assembled | 40 |
| 41/52 bis 41-75/75 | 2 | M12 | pre-assembled | 60 |
| 41/21 D bis 41/45 D | 1 | M10 | in loose form | 40 |
| 41/52 D bis 41-75/75 D | 1 | M12 | in loose form | 60 |
For ceiling mounting under high loads (up to 7.0 kN), we recommend the use of at least one fully traversing bolt for connecting the channel to the End Support WBD (for examples see "Installation Guideline").
Selection guide for channels:
| Type | Suitable for Sikla Channel |
|---|---|
| 41/21-31 | 41/21/1,5 - 2,0 & 41/31/2,0 |
| 41/41-45 | 41/41/2,0 - 2,5 & 41/45/2,5 |
| 41/52 | 41/52/2,5 |
| 41/62 | 41/62/2,5 |
| 41-75/65 | 41-75/65/3,0 |
| 41-75/75 | 41-75/75/3,0 |
| 41/21 D | 41/21/1,5 - 2,0 D |
| 41/41-45 D | 41/41/2,0 - 2,5 D & 41/45/2,5 D |
| 41/52 D | 41/52/2,5 D |
| 41/62 D | 41/62/2,5 D |
| 41-75/65 D | 41-75/65/3,0 D |
| 41-75/75 D | 41-75/75/3,0 D |
Documents
- Loads - End Support WBD 41/21-31 & 41/21 D
PDF (0.16MB)