Corner Bracket WD F100 HCP
Group: A430
90° connection of TP F 80 beam sections with form-fit connection using Self Forming Screw FLS F
Flexible structures with high load-bearing capacity through the use of the Corner Bracket WD F 80
Overview of Types
General Information
Component to be used for connections between two F100 or F100/160 sections when the structural design requires an alternative to the End Support STA F 100 as the default solution. Connections with the Corner Bracket WD F 100 allow flexible constrcutions and provide a high load capacity at the same time. Using the bracket hole (Ø 18mm) additional bracings can be installed and comprehensive solutions can be realized.
Certification
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Load range
Type | -VX,perm. | VX,perm. | -VY,perm. | VY,perm. | -VZ,perm. | VZ,perm. |
WD F100 HCP | 44,20 kN | 44,20 kN | 27,00 kN | 27,00 kN | 60,30 kN | 60,30 kN |
Type | -MX,perm. | MX,perm. | -MY,perm. | MY,perm. | -MZ,perm. | MZ,perm. |
WD F100 HCP | 6,6 kNm | 6,6 kNm | 8,1 kNm | 8,10 kNm | 3,9 kNm | 3,9 kNm |
Also available with DUALSHIELD for high corrosion protection within C5H environments.
Software
This product is available in the following software.
Installation
To be used in pairs only. 8 pieces of Self Forming Screw FLS are necessary for one Corner Bracket.
Documents
- siFramo - ETA-24/0471
PDF (2.15MB)