Channel Adapter SA F 80 HCP
Group: A427
Enables compatibility of Channel 41/41 and 41/41 D with the F 80 beam sections
Easy creation of routes or structures, optionally with siConnect system components
Overview of Types
General Information
Interface element to enable a stiff and solid connection between the siFramo profile and strut channel of the international 41/41 mm standard. The 41/41 Channel Adapter SA F80 is equipped with automatically locking spring nuts which means that no accessories from the strut channel’s range are required in order to make the connection.
Certification
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Load range
Type | -VX,perm. | VX,perm. | -VY,perm. | VY,perm. | -VZ,perm. | VZ,perm. |
SA F 80-41 HCP | 3,30 kN | 3,30 kN | 26,60 kN | 26,60 kN | 24,10 kN | 24,10 kN |
Type | -MY,perm. | MY,perm. | -MZ,perm. | MZ,perm. |
SA F 80-41 HCP | 0,7 kNm | 0,70 kNm | 0,9 kNm | 0,9 kNm |
Also available with DUALSHIELD for high corrosion protection within C5H environments.
Software
This product is available in the following software.
Installation
The Channel Adapter SA F80-41 requires 4 x Self Forming Screw FLS in order to be connected to the siFramo profile. The strut channel must be inserted with the slot first whilst pressing the two bolt’s heads triggering an automatic 90°-locking operation of the two channel spring nuts. The strut channel is now securely held and can be adjusted. Finally the two screws must be tightened with the appropriate torque for the strut channel used.