Cantilever Bracket AK CC 46-P HCP

Group: B101

Prefabricated single-arm cantilevers for the PRO 46 profile

Select a Type

Overview of Types
General Information
Installation
Documents

Overview of Types

General Information

Prefabricated single-arm cantilevers for the PRO 46 profile.

Certification

Technical specifications

Material base body	steel
Surface	HCP
Corossion class	C4

Load range

Type	-V_X,perm.	V_X,perm.	-V_Y,perm.	V_Y,perm.	-V_Z,perm.	V_Z,perm.
AK CC 46-P - 200 HCP	11,84 kN	11,84 kN	3,10 kN	3,10 kN	0,83 kN	0,83 kN
AK CC 46-P - 400 HCP	11,84 kN	11,84 kN	3,10 kN	3,10 kN	0,83 kN	0,83 kN
AK CC 46-P - 600 HCP	11,84 kN	11,84 kN	3,10 kN	3,10 kN	0,83 kN	0,83 kN
AK CC 46-P - 800 HCP	11,84 kN	11,84 kN	3,10 kN	3,10 kN	0,83 kN	0,83 kN
AK CC 46-P -1000 HCP	11,84 kN	11,84 kN	3,10 kN	3,10 kN	0,83 kN	0,83 kN

Type	-M_Y,perm.	M_Y,perm.	-M_Z,perm.	M_Z,perm.
AK CC 46-P - 200 HCP	0,43 kNm	0,43 kNm	0,15 kNm	0,15 kNm
AK CC 46-P - 400 HCP	0,43 kNm	0,43 kNm	0,15 kNm	0,15 kNm
AK CC 46-P - 600 HCP	0,43 kNm	0,43 kNm	0,15 kNm	0,15 kNm
AK CC 46-P - 800 HCP	0,43 kNm	0,43 kNm	0,15 kNm	0,15 kNm
AK CC 46-P -1000 HCP	0,43 kNm	0,43 kNm	0,15 kNm	0,15 kNm

Software

This product is available in the following software.

Installation

When used in conjunction with sliding elements, a cross brace (in combination with Tie Rod STR and Blockset PBS 46 M10 x 50) is recommended to resist forces in the axial direction of the pipe. For cantilever lengths >= 500 mm, a vertical brace or support (e.g. with tie rod STR and blockset PBS 46 M10 x 50) is recommended.

Tightening torque: 20 Nm

Configuration: Base plate welded to Profile PRO 46-P

Required tool: T50 Bit or 17 mm (AF) Socket Bit

Documents

Guidelines / Static

Static Guideline - siMetrix
PDF (1.91MB)