Beam Bracket TKO F 80 HCP
Group: A423
Suitable for single-arm cantilevered mounting on walls, floors, and ceilings
Compatible with steel beams 100 and 120
Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
Group: A423
Suitable for single-arm cantilevered mounting on walls, floors, and ceilings
Compatible with steel beams 100 and 120
Depending on the situation, different options are recommended:
a) Directly to building structure: 4 x suitable wall anchors M12
b) To traditional steel beams between 80 – 120 mm flange dimensions: 1x Assembly Set 5P M12 S
c) To traditional steel beams > 120 flange dimension: with on-demand Adaptor Plate (tbc)
d) To Sikla siMotec Steel Beams 100/120: with Bracket Plates FV 100/120 when positive mechanical connection required
Configuration: Base plate welded to Beam Section F 80
Info | Type | LG | Weight | Quantity | Part number | |
| TKO F 80- 400 HCP | 413 mm | 6.6 kg/pcs. | 1 pcs. | 192788 | ||
| TKO F 80- 800 HCP | 813 mm | 9.2 kg/pcs. | 1 pcs. | 192795 | ||
Galvanised hollow-box-section with welded end-plate to serve as cantilever arm. May be used as a crossbar when combined with End Support STA/End Support WBD and 4 x Self Forming Screw FLS.
Certification
CE mark (Declaration of performance see downloads)
ETA-24/0471
Primary element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
Type | -VX,perm. | VX,perm. | -VY,perm. | VY,perm. | -VZ,perm. | VZ,perm. |
TKO F 80- 400 HCP | 106,00 kN | 106,00 kN | 64,30 kN | 64,30 kN | 64,30 kN | 64,30 kN |
TKO F 80- 800 HCP | 106,00 kN | 106,00 kN | 64,30 kN | 64,30 kN | 64,30 kN | 64,30 kN |
Type | -MX,perm. | MX,perm. | -MY,perm. | MY,perm. | -MZ,perm. | MZ,perm. |
TKO F 80- 400 HCP | 3,7 kNm | 3,7 kNm |
The specified load values are design loads Rd and include a partial safety factor γM2 = 1.25 (DIN EN 1993-1-8:2025-04, Table 4.1)
A partial safety factor of γG = 1.35 (DIN EN 1990:2021-10, Table A1.2(B)) must be taken into account for permanent loads.
Also available with DualShield for high corrosion protection within C5H environments.
Software
This product is available in the following software.
5,5 kNm
5,5 kNm |
5,5 kNm |
5,5 kNm |
TKO F 80- 800 HCP | 3,7 kNm | 3,7 kNm | 5,5 kNm | 5,5 kNm | 5,5 kNm | 5,5 kNm |
siFramo - ETA-24/0471
PDF (2.15 MB)