Roof Fixations
Arrangement flex frame
Bolt Screw Set ST-41 
Group: 1562
Application
For attachment of Channel 41 and Flex Frames to profiled insulated roof sheets, trapezoidal decking or sandwich panels with a timber batten sub-structure.
Configuration
Two Bolt Screws incl. Sealing, Nuts, Spacers and Holding Bracket in polybag.
Installation
Drill a ø 8.5 mm hole through the highest point of the roofing into the timber battens below. Use Channel as a drilling template. Drill out a ø13mm counter-bore hole through the roof material to the face of the batten. Install the Bolt Screw such that the woodscrew thread is fully engaged to the timber in order to provide the maximum load capacity. The sealing disk should be compressed against the batten. Insert and fix the channel.
Technical Data
| Max. perm. loads: | up to Fz = 3.0 kN Fq according to roof pitch and screw option |
| Material: | |
| Holding Bracket and Washer 12/40: | HCP or HDG |
| Bolt Screw, Nut and Spacer: | Stainless steel 304 |
| Sealing: | EPDM |
| Type | W [kg] |
Quantity/ [pack] |
Part number |
|---|---|---|---|
| ST-41 | 0.71 | 1 | 195130 |