Beam Clamp TCS

page as pdf

Group: 1337

Application

Heavy-duty connection element which, in combination with grub screws (M8 up to M16), are suitable for mounting pipes, ducts and equipments to steel beams (I-, T-, U-and angle steel beams).

• The combination with a Universal Joint provides for vertically aligned attachment to inclined beams.
• Can serve as single mounting element for installing crossbars and for fixing cantilever structures.
• Due to their special base profile, TCS 1 Beam Clamps can also be slid along and retained in the opening of Sikla Channels of the 41 series.

Configuration

Pre-assembled with clamping bolt and locking nut.

Installation

Tighten the clamping bolt of the Beam Clamp first by hand, then tighten down with a spanner according to the mounting structures. The hardened point of the clamping bolt will penetrate the comparatively soft material of the beam, ensuring a solid and highly secure connection. Tighten the locking nut for securing the installation.
For installation near a cutting edge of a channel, an additional Holding Bracket 41 has to be mounted.

Technical Data

The nominal loads indicated apply to new Beam Clamps fixed to undamaged beam flanges only.

Approvals

Approved and accepted by VdS and FM for use with stationary fire extinguishing systems.
TCS O LC Approval: G4950065 and G4950066 (erected mounting with M10 up to a maximum height h_max = 150 mm and up DN 50 only). For further types and different application fields: G4820023; G4830054; G4800039/ ...45; G4990027.