Supports
Sliding Support LU - H 40
Application
Serves as a base for pipes, to be fixed on steel beams with minimum flange width of 80 mm. For pipe sizes up to NB 150, one PA block is sufficient. For pipes of NV 200 up to 300, two blocks are to be bolted together to provide a bigger rest (any number of PA blocks can be lined up).
Configuration
NB 25 up to NB 150: 1 PA block and 1 Clamping Set
NB 200 up to NB 300: 2 PA blocks and 2 Clamping Sets
Claming sets contain:
2 Clamping Hooks C
1 Grub Screw M12 x 200
3 Nuts M12
- When attaching to beams with flanges wider than 120 mm, longer bolts have to be used.
Installation
The pipe slides directly on the 40 mm high PA blocks. The lateral guide of the pipe has to be provided by other means. From DN 200 on, pre-assemble the PA blocks using a M12 x 30 hexagon bolt and a hexagon nut first.
Technical Data
| NB | H [mm] | Clamping Sets [Pcs.] | PA blocks [Pcs.] |
|---|---|---|---|
| DN 25 - 150 | 40 | 1 | 1 |
| DN 200 - 300 | 40 | 2 | 2 |
| Material: | |
| Clamping Hooks | Steel hot-dipped galvanised |
| Grub screws, nuts | Steel, hot-dipped galvanised |
| PA block | Polyamide 6.0, 30 % glass fibre reinforced, black |
| Temperature range | -20 to +130° C (at the PA block) |
| Type | For pipes of dia. [mm] from ... to |
W [kg] |
Quantity/ [pack] |
Part number |
|---|---|---|---|---|
| LU - H 40 DN 25 - 150 | 33.7 - 168.3 | 0.7 | 1 | 164241 |
| LU - H 40 DN 200 - 300 | 219.1 - 323.9 | 1.4 | 1 | 164250 |