High Corrosion Protected Products
Beam Clip P hcp
Group: 1831
Application
Universal clamping element for bi-lateral attachment of products with base plates or of crossbars for pipes, ducts and equipment to steel beams.
If the height of the flange is bigger than the maximum clamping range, this can be increased using a spacer of up to 10 mm. If higher spacers are used, these have to be welded to the crossbar.
Installation
Determination of the required bolth length Lmin:
 |  |  |
| Pass-through bolt P 2: Lmin = a + b + 43 [mm] P 3: Lmin = a + b + 48 [mm] | Channel nut P 2: Lmin = b + 45 [mm] P 3: Lmin = b + 50 [mm] |
Technical Data
| Type | Working load (Tension) |
|---|---|
| P 2 | 5.0 kN |
| P 3 | 7.0 kN |
Note: For vertical installation, please contact Sikla Technical Department.
| Material: | Cast iron, hcp or hdg |
| Type | Size range [mm] |
ø D [mm] |
L [mm] |
B [mm] |
W [kg] |
Quantity/ [pack] |
Part number |
|---|---|---|---|---|---|---|---|
| P2 | 1 - 33 | 13 | 62 | 50 | 0.23 | 25 | 165905 |
| P3 | 1 - 33 | 17 | 69 | 50 | 0.25 | 25 | 165914 |