Beam Clamp TCS 1 hcp

page as pdf

Group: 1837

Application

Heavy-duty connection elements which, in combination with grub screws (M10), are suitable for mounting pipes, ducts and equipment to steel beams (I-, T-, U- and angle steel beams).

• The combination with a Universal Joint ss provides for vertically aligned attachment to inclined beams.
• Can serve as single mounting elements, for installing crossbars and for fixing cantilever structures.
• Due to their special base profile, TCS 1 Beam Clamps can also be slid along and retained in the opening of Sikla Channels of the 41 series.

Configuration

Pre-assembled with clamping bolt and locking nut.

Installation

Tigthen the clamping bolt of the Beam Clamp first by hand, then tighten down with a spanner according to the mounting instructions. The hardened point of the clamping bolt will penetrate the comparatively soft material of the beam, ensuring a solid and highly secure connection. Tigthen the locking nut for securing the installation.
For use in the area of a cutting edge of a channel, an additional Holding Bracket 41 must be mounted.

Note: Read relevant mounting instructions before installation!

Technical Data

This nominal load applies to new Beam Clamps fixed to undamaged beam flanges only.