Slide Supports
Slide Set GS 1G 
Group: 1336
Application
Slide Set for mounting of small pipe lines with possible elongation of length. Space-saving and thus also to be used for smaller centre distances, especially in combination with pipe clamps Ratio S and LS. The stop at the skid avoids the pipe line from sliding and at the same time is a comfortable guide for rising pipes. Guiding corrugations guarantee the exact 90° arrangement and avoid the screwing up of the slide set.
Installation
Connection to channel system 41, ideally use flange screw M10 x 25. For drive plugs use flange screw M10 x 15. Fixation with hexagon bolt M8 or M10 is also possible.
Technical Data
| Permissible load for ceiling mounting: | 0.6 kN |
| Permissible load for floor mounting: | 1.2 kN |
| Lever arm Lmax: | 150 mm |
| Permissible bending moment for wall mounting: | 20 Nm |
| Maximum sliding distance: | 45 mm |
| Static friction coefficient µ0: | 0.15 |
| Sliding frition coefficient µ: | 0.13 |
| Material: | Steel, electro-galvanised |
| Type | Thread connection |
W [kg] |
Quantity/ [pack] |
Part number |
|---|---|---|---|---|
| 1G | M10 | 0.08 | 25 | 198834 |