Products of Fixing to Beams and Roof Panels
Piercing Tool LOT
Group: 8140
Application
For simultaneously punching two holes of ø 10.5 mm into trapezoidal corrugated roofing of a maximum thickness of 1.2 mm, providing for the subsequent mounting of a Sikla Roof Hanger.
The optimised transformation allows already with very less strength a high cutting force at the hole punches. Thus several successively piercings or piercings in thicker sheets are possible without problems.
Further advantages are:
- Continous adjustment of the cutting width for application of various profiles from 40 - 100 mm
- Continous adjustment of the height position for an exact and uniform alignment of the hole positions taken from the lower edge of the trapezoidal corrugated sheet.
- After piercing, ejector springs ensure a safe return stroke of the hole punches.
Configuration
Completely with hole punches.
Hole Punches could be re-ordered or exchanged if required.
Technical Data
| Total length: | 710 mm |
| Material: | |
| Holders | Steel tube, lacquered with plastic grip |
| Joint parts | Steel |
| Hole punch | Steel, tempered, ø 10,5 mm |
| Ejector springs | Stainless steel |
| Type | W [kg] |
Quantity/ [pack] |
Part number |
|---|---|---|---|
| LOT 3 | 2.47 | 1 | 171296 |