Pressix CC 41 - Assembly System
Clamping Unit KL
Group: 1357
Application
Used for assembling double channels made from Sikla Channels with slot pattern III or IV, i.e. with a minimum material thickness of 2.5 mm.
This system could be used be used for pre-assembly in a workshop also.
When a torque wrench is required in order to ensure that the static values indicated on page 3-7 are achieve.
Attention: These values are only guaranteed when using Sikla Channels.
Configuration
Consists of forming plate, pressure plate and a hexagon socket bolt M8 (DIN 7991)
Installation
Max. spacing between connecting points is 500 mm, with one point at each end of the channel section. Required number of Clamping Units: channel 2m = 5 pcs., channel 6m = 13 pcs.
Torque: M = 25 Nm
Technical Data
| Material: | Malleable cast iron, electro-galvanised |
| Type | For Sikla Channel | W [kg] |
Quantity/ [pack] |
Part number |
|---|---|---|---|---|
| KL 1 | 41/21/2.0 bis 41-75/75/3.0 | 0.11 | 50 | 118055 |