Pressix CC 41 - Assembly System
Clamping End SKL
Group: 1350
Application
Mounting element to be fixed within the flanges of I- and U-shaped beams. The systems (such as pipes, etc.) supported this way may run parallel or at right angles to the direction of the I or U beam.
Also suitable as support for crossbars between two vertically adverse arranged profiles.
Configuration
Pre-assembled
Installation
The tightening moment of the clamping bolts must be between 1 (minimum) and 1 1/2 (maximum) turns; then tighten locking nuts.
Note:
The length of the channel to be cut : inside diameter of beam less 25 mm
Technical Data
| Permissible load per set: | Crossbar support: (2 sets) 5.0 kN/crossbar Single attachment: (1 set) 2.5 kN |
The maximal torsional moment of the channel is to be taken into consideration.
| Material: | Cold-worked steel, electro-galvanised |
| Type | For Channel size | Minimum beam type [mm] |
L [mm] |
B [mm] |
W [kg] |
Pack. [Set] |
Part number |
|---|---|---|---|---|---|---|---|
| SKL | 41/41/2.5 u. 41/45/2.5 | IP 140. U 200 | 100 | 62 | 0.93 | 5 | 145671 |