Pressix CC 27 - Assembly System
Speed Nut NT CC 27 
Group: 2714
Application
In particular useful for installation in vertical channels or in places of difficult access.
Further advantages:
- For all Sikla channels 27/27 and 27/15, independent of the channel's height.
- No getting stuck on bolt heads when sliding in the channel.
- No appearance of settlement after tightening.
Configuration
Channel Nut and Spring are tightely connected.
Installation
After inserting the Speed Nut into the channel opening, exert a slight axial pressure. This will cause the nut to turn to the right and engage into the channel. De-installation simply requires the nut to be turned to the left and pulled free. Installation and de-installation do not required tools and may be repeated several times.
Tighten the part to be connected - that's it!
Technical Data
| Fz = | 1.5 kN |
| Material: | |
| Channel nut: | Steel, class 5.6, electro-galvanised |
| Spring washer: | Sheet metal spring steel, rustproof |
| Type | W [kg] |
Quantity/ [pack] |
Part number |
|---|---|---|---|
| CC 27-M6 | 0.01 | 100 | 195956 |
| CC 27-M8 | 0.01 | 100 | 195949 |