Pipe Clamps and Accessories
Height Adjuster HRS P
Group: 1339
Application
Suitable for all M&E services. May be fixed directly to the ceiling (anchor) or in a suitable channel. Especially advantageous due to the suspension unit in the upper section of the height adjuster, since it enables the pipes to move in all directions.
Configuration
Pre-assembled component, no loose parts.
Installation
The upper part of the base component can be used as a tool for screwing in the suspending bolt. Then the bolt only has to be tightened with an open-ended spanner. After mounting, the base component rests freely mobile and rotatable on the rounded bolt head. Fixing a locking nut against the cup nut secures the height adjusted.
Technical Data
| Material: | Base component cast iron, all components galvanised |
| Max. perm. working load | 4.0 kN |
| Max. swinging angle | 7° |
| Type | Connection to system |
Connection to building structure |
Adjustment height |
W [kg] |
Quantity [pack] |
Part number |
|---|---|---|---|---|---|---|
| P M8 | M8 | M8 x 22 | 25 mm | 0.06 | 25 | 151519 |
| P M10 | M10 | M10 x 22 | 25 mm | 0.08 | 25 | 151528 |