Ducting Supports
Ducting Clamp PLU 1G-N with lining
Group: 1622
Application
Two-piece pipe clamp for simple installation of spiral-seam ducts.
Suitable for soundproof installation according to DIN 4109.
Configuration
Clamping bolts are pre-mounted and retained. Pivot screw for safe and simple assembly with quick-set clip, suitable for "single-hand" mounting. Easier handling and better storage possibilities due to optimized packaging.
Installation
Tighten upper part of the pipe clamp without the interfering lower part.
Hook lower part, provided with a keyhole, into the fixed clamping bolt (see picture).
After inserting the pipe and locating into the pivot screw, the clamping bolt head is located behind the angled profiles; then tighten clamping bolt with max. 2 Nm.
Technical Data
| Typ | Material [mm] | Perm. load capacity [kN] | Thread connection |
|---|---|---|---|
| 71 - 200 | 20 x 1.5 | 0.8 | M8 |
| 224 - 500 | 25 x 1.5 | 1.0 | M10 |
| Material: | Steel, galvanised |
| Type | W [kg] |
Quantity [pack] |
Part number |
|---|---|---|---|
| 71 | 0.11 | 50 | 199824 |
| 80 | 0.12 | 50 | 199831 |
| 90 | 0.13 | 50 | 199848 |
| 100 | 0.15 | 100 | 199855 |
| 112 | 0.16 | 100 | 199862 |
| 125 | 0.17 | 100 | 199879 |
| 140 | 0.19 | 70 | 199886 |
| 150 | 0.20 | 70 | 199893 |
| 160 | 0.21 | 70 | 199909 |
| 180 | 0.23 | 50 | 199916 |
| 200 | 0.25 | 50 | 199923 |
| 224 | 0.46 | 50 | 199930 |
| 250 | 0.51 | 40 | 199947 |
| 280 | 0.56 | 40 | 199954 |
| 300 | 0.59 | 40 | 199961 |
| 315 | 0.62 | 40 | 199978 |
| 355 | 0.70 | 40 | 199985 |
| 400 | 0.86 | 30 | 199992 |
| 450 | 0.87 | 20 | 199993 |
| 500 | 0.96 | 20 | 199994 |