Anchors and Small Parts
Drive Plug AN
Group: 1401
Application
Hammerset Anchor for non-cracked concrete used for all M&E services. Suitable for fixing pipelines, channels, etc. meeting the respective approval requirements - for damp locations and outdoor constructions the stainless steel version is required.
- No special drill required
- Setting tool for distance-controlled forced expansion.
- Suitable for push-through mounting
Installation
As expansion tool use the respecive expansion cone for drive plug.
The "intelligent" expansion cone facilitates the mounting with bore dia. tolerances.
Technical Data
| Permissible load (tensile, shear, oblique) in cracked concrete multiple fixation: | M8 | M8 x 40 | M10 | M12 |
| Permissible load for single plug C20/25-C50/60 [kN] | 1.7 | 2.0 | 2.0 | 2.4 |
| Permissible bending moments (Steel 4.6) Mperm [Nm] | 6.4 | 6.4 | 12.8 | 22.2 |
| Permissible bending moments (Steel 8.8) Mper [Nm] | 17.1 | 17.1 | 34.3 | 60.0 |
| Loads under fire exposure | | |||
| Permissible load R30 to R90 perm. F [kN] | 0.9 | 0.9 | 1.5 | 1.5 |
| Permissible load R120 perm. F [kN] | 0.4 | 0.4 | 1.0 | 1.2 |
| Mounting dates in general: | M8 | M8 x 40 | M10 | M12 | M16 |
| Nominal diameter of drill d0 = [mm] | 10 | 10 | 12 | 15 | 20 |
| Depth of bore hole h0 = [mm] | 30 | 40 | 40 | 50 | 65 |
| Push-through hole in connecting component df ≤ [mm] | 9 | 9 | 12 | 14 | 18 |
| Length of thread/max. Anchoring depth Lth [mm] | 13 | 20 | 15 | 18 | 23 |
| Minimum anchoring depth Lsdmin [mm] | 9 | 9 | 11 | 13 | 18 |
| Max. tightening torque when mounting Tinst = [Nm] | 8 | 8 | 15 | 35 | 60 |
| Minimum thickness of component hmin [mm] | 100 | 100 | 120 | 130 | 160 |
| Min. centre distance smin [mm] | 60 | 80 | 100 | 120 | 150 |
| Min. edge distance cmin [mm] | 95 | 95 | 135 | 165 | 200 |
| Approval for anchoring in non-cracked concrete: | M8* | M8 x 40 | M10 | M12 | M16 |
| Perm. tension load C20/25 (Steel 4.6 up to 8.8) [kN] | 2.8 | 3.6 | 5.1 | 7.1 | 10.5 |
| Oblique (Steel 4.6) perm. V ≥ C20/25 [kN] | 3.1 | 3.1 | 4.1 | 7.2 | 13.4 |
| Oblique (Steel 8.8) perm. V ≥ C20/25 [kN] | 3.9 | 3.9 | 4.1 | 12.0 | 18.0 |
| Bending moments (screw 4.6) perm. M [Nm] | 6.4 | 6.4 | 12.8 | 22.2 | 56.8 |
| Bending moments (screw 8.8) perm. M [Nm] | 17.1 | 17.1 | 34.3 | 60.0 | 152.0 |
* Application for indeterminated static systems
Details on bearing capacities without influence of centre distances or edge distances.
For detailed dimensioning (see report).
| Material: | Steel, electro-galvanised, expansion cone is retained preventing accidental falling out |
Approvals
For multiple mounting of non-bearing systems:
MKT-Approval ETA-05/0116, for anchorage in non-cracked concrete MKT-Approval ETA-02/0020, Fire protection examination, VdS-conform, FM-Approval ≥ M10
| Type | Length [mm] |
W [kg] |
Quantity/ [pack] |
Part number |
|---|---|---|---|---|
| M8 | 30 | 0.01 | 100 | 125505 |
| M8 x 40 | 40 | 0.01 | 100 | 153283 |
| M10 | 40 | 0.02 | 50 | 125514 |
| M12 | 50 | 0.04 | 50 | 125523 |
| M16 | 65 | 0.10 | 25 | 112518 |